> Whisper II ATX ver 2.0

The new SLI technology from NVIDIA sure
stir up a lot of attention this year for
hardcore video gamers and professional
systems. The new Whisper II 2.0 will
satisfied all of your SLI needs. Advance
design and higher efficiency allows you to
play harder and work longer without any
interruptions.

All in 1 model support DUAL CPU MB
  Back To Home Page
   
EG565P-VE FMA 2.0 (535W)

All In One Series (New) FMA ATX12V Ver2.01 535W

  • All in One
    All In One meets all platforms' requirement-both desktop and dual
    processor server/workstation systems,including two power supply
    form factors"ATX12V" for ATX & BTX and "EPS12V"forEEB,CEB.
    "All In One"family power supplies offer best cooling,most stable
    power output,low noise operation,and actual energy saving for power
    users'high-end systems.In addition,two split PCI Express power
    connectors fully support dual graphics technology to output the ultimate performance.
  • ATX 12V V2.01
    Support latest P4 Prescott and Athlon 64/64 FX processors based systems: P4 main boards that use 875 (Canterwood)
    and 865 (Springdale) chipsets, and also fully support power requirements for platforms using chipsets like Intel 925 (Alderwood) or 915 (Grantsdale) and next generation CPU.Intel approved
  • Dual Fan
    The best cooling method for PC system, and is strongly suggested
    by AMD.
  • Separate 12V rails
    Independent 12V rails supply to MB/CPU and drives in order to provide stable and clean current to noise-sensitive devices,
    such as: CPU, add-on cards.
    offer a safer operating circumstance to users.
  • SATA power connectors
    Connect your system to the faster SATA interface for better performance.
  • Manual and automatic fan speed control
    Manual fan speed control to keep the balance between cooling
    effect and acoustic noise. Automatic fan speed adjustment to prevent system overheat.
  • Reliability
    OCP, UVP, OVP, OLP, OTP, and SCP circuits ensure system well guarded from any dangers. Maximize safety for your hardware
    and valuable data.
  • Ring Core
    Effectively prevents electro-magnetic pulse leaking from
    switching power supply to appliances that are being attached
    to the same power source, i.e. AC wall plug.
  • PFC Function(AX Series only)
    PF value 0.99 under condition of 230VAC/50Hz at full load.
  • Fan Monitor function
    RPM signal of 8cm fan is provided for MB detection.
  • Silence
    Acoustic noise is successfully reduced with two fans giving
    more airflow in less rpm and smooth mechanical design of fan guards    .
> Top Features
ATX +12V Ver 2.01
The latest power supply design guide recommended by Intel to meet the latest
specifications. Support all of the latest Intel (915/925 chipset) and AMD 64 processors.

One of the changes from ATX12V Ver 1.3 is the Dual +12V Rails, this allows processors
to operate on a separate +12V rails in order to minimize any unwanted noise from
peripherals that might cause system to lock up.
Dual +12V Rails
Independent 12V rails supply to MB/CPU and drives in order to provide stable and clean current to noise-sensitive devices, such as: CPU, add-on cards.Meet UL 240VA safety requirements. It also separate the motherboard rails and video card rails to
ensure maximum power to your PCI Express video card.
Support SLI
Our native SLI power connector are built on a separate rails to ensure a healthy dosage
of power to your SLI video cards. PCI Express Graphic card can consume up to 90W on
the +12 Rails.
Ring Core Technology
Effectively prevents electro-magnetic pulse leaking from switching power supply to appliances that are being attached to the same power source, i.e. AC wall plug.
Protection
Enermax has one of the highest protection standard on the market today, due to our advance design we offer the following type of protections:

OCP-Over Current Protection, UVP-Under Current Protection, OVP- Over Voltage Protection,
OLP-Over Load Protection, OTP- Over Temperature Protection, SCP- Short Circuits Protection.
> Specifications
 
Rails
 EG535P-VE FMA 2.0  
+12v1
18A
34A
combine pw
   
+12v2
18A
  
-12v
0.8A
+5v
32A
+5v sb
2.5A
+3.3v
32A
 
Model: EG565P-VE FMA 2.0
Maximum Power: 535W (support both 24pins and 20pins motherboards)
Input Voltage: 90V~135V or 90V~265V
Input Frequency Range: 47Hz~63Hz
Input Current: 40A/115V and 80A/230V max. during cold start
Hold up time: 17ms at 115VAC or 230VAC, full load
Over Voltage Protection: +5V: 5.5V~7.0V; +3.3V:3.76V~4.3V; +12V & +12V2: 13.4V~15.6V
Over Load Protection: 110~160% of max load
Over current Protection: +3.3V : 55A (max); +5V: 48A (max); +12V1 & +12V2: 20A (max)
Over Temperature Protection: Operating Ambient 10ēC~40ēC, Storage Ambient -40ēC~70ēC
Humidity:
Operating : to 85% relative humidity, non condensing at 25ēC
Storage: to 95% relative humidity, non condensing at 50ēC
MTBF: Greater than 100K hours at 70% of full rated load; 230VAC / 50Hz input; 25ēC ambient
EMC: EN55022 Class B, EN61000-4-2 Class B, EN61000-4-3 Class A, EN61000-4-4 Class B, EN61000-4-5 Class B, EN61000-4-6 Class A, EN61000-4-8 Class A, EN61000-4-11 Class B, FCC Part 15 & Part 2, CNS 13438 Class B
Safety: Approval UL, cUL, TēV, CB
Dimension: W150 x H86 x D140 (mm)
 
Cables Layout
   
20+4 Main Power
P4 +12V CPU
2x 6 Pins PCI E
Support SLI
Serial ATA
HDD Power
FDD Power

Number of Connectors
20+4 Pins Main Power: 1 (support 24P and 20P MB)
+12V CPU: 1x8pins
6 Pins PCI Express: 2
Serial ATA: 4
HDD Power:7
FDD Power: 2
Fan Monitor: 1
Fan RPM Monitor